Propiedades :

  • Dimensions
  • CHEMICAL COMPOSITION
  • MECHANICAL PROPERTIES
  • QUALITY STANDARDS
Quality Thickness Measures Width x Length Theoretical Weight
Caliber N ° (mm) (mm x mm) (kg/m2) (kg / sheet)
A366 29 0,35 1.000 x 2.000 2,818 5,635
0,38 1.000 x 2.000 3,059 6,118
26 0,45 1.000 x 2.000 3,623 7,245
1.200 x 2.400 3,623 10,433
24 0,60 1.000 x 2.000 4,830 9,660
1.200 x 2.400 4,830 13,910
23 0,70 1.000 x 2.000 5,365 11,270
1.200 x 2.400 5,635 16,229
22 0,75 1.000 x 2.000 6,038 12,075
1.200 x 2.400 6,038 17,388
21 0,80 1.000 x 2.000 6,440 12,880
1.200 x 2.400 6,440 18,547
20 0,90 1.000 x 2.000 7,245 14,490
1.200 x 2.400 7,245 20,866
19 1,10 1.000 x 2.000 8,855 17,710
1.200 x 2.400 8,855 25,502
18 1,20 1.000 x 2.000 9,660 19,320
1.200 x 2.400 9,660 27,821
17 1,40 1.000 x 2.000 11,270 22,540
1.200 x 2.400 11,270 32,458
16 1,50 1.000 x 2.000 12,075 24,150
1.200 x 2.400 12,075 34,776
14 1,90 1.000 x 2.000 15,295 30,590
1.200 x 2.400 15,295 44,050
A619 23 0,70 1.200 x 2.400 5,635 16,229
20 0,90 1.200 x 2.400 7,245 20,866
18 1,20 1.200 x 2.400 9,660 27,821
16 1,50 1.200 x 2.400 12,075 34,776
14 1,90 1.200 x 2.400 15,295 44,050
A620 23 0,70 1.200 x 2.400 5,635 16,229
20 0,90 1.200 x 2.400 7,245 20,866
18 1,20 1.200 x 2.400 9,660 27,821
16 1,50 1.200 x 2.400 12,075 34,776
14 1,90 1.200 x 2.400 15,295 44,050
  Original coils with a weight of 16 to 14 tons. We offer our Service Center:
  • Coils reduced to required weight.
  • Coils cut into strips with a minimum width of 20 mm.
  • Sheets in widths and lengths required.
  • Other requirements per order, please consult.
CHEMICAL ANALYSIS (%) MAXIMUM VALUES
Rule C Mn P S Si Cu Ni Cr Mo V Ti Nb Al B
A-366 0,12 0,55 0,02 0,025 0,1 0,2 0,15 0,1 0,04 0,008 0,008 0,008 0,08 --
A-619 0,07 0,45 0,015 0,015 0,05 0,12 0,1 0,1 0,04 0,008 0,02 0,008 0,08 --
A-620 0,06 0,3 0,015 0,018 0,05 0,06 0,04 0,05 0,04 0,008 0,02 0,008 0,08 --
Rule Efforts (Mpa) A% Hardness (HRB) Bent 180 °
Fluence Maximum
A-366 280 max 270 a 410 28 mín 60 máx 0e
A-619 --- --- --- 55 máx ---
A-620 280 máx 270 a 410 28 mín 50 máx ---
Rule Description and Uses
Commercial Quality ASTM A-366 This specification covers carbon steel coils and sheets, Commercial quality cold rolled. This material is recommended for both exposed and protected pieces, where prints and Moderate deformations in addition to welds can be involved.
ASTM A – 569 This specification covers coils and cut sheets of steel, with low carbon content less than 15%, hot rolled commercial quality This material is used in pieces where they can be involved bending, stamping and deformation process.
Stamped Quality ASTM A-619 This specification covers carbon steel coils and sheets, cold rolled quality stamping. It is recommended in the manufacture of pieces where deformations and severe prints (deep sausage) are present.
ASTM A-620 This specification covers carbon steel coils and sheets, quality cold rolled Stamping, special calming. It is recommended in the manufacture of pieces where deformations and particularly severe prints (extra deep sausage), or where a surface free of wrinkles is required.
ASTM A-621 This specification covers bonines and carbon steel sheets, hot rolled quality stamping. It is recommended in the manufacture of pieces where deformations and severe prints (deep sausage) and where the superficial appearance is not paramount.
ASTM -622 This specification covers carbon steel coils and sheets, Hot rolled quality Stamping, special calming. It is recommended in the manufacture of pieces where deformations and particularly severe prints (extra deep sausage).
Structural Quality ASTM A-36 This specification covers steel profiles, sheets and bars carbon structural quality to be welded, riveted or bolted in the construction of bridges and buildings, and for structural purposes.
ASTM A-283 GRADE C This specification covers quality carbon steel sheets structural for general applications.
ASTM A-572 GRADE 50 This specification covers high strength structural steels and low cobaltovanadium alloy, recommended for construction riveted, bolted or welded bridges, buildings and other structures.
Naval Quality ASTM A-131 GRADE A This specification covers profiles, sheets, bars and rivets mostly used for naval constructions.
Quality for Pressure Vessels ASTM A-516 B GRADE 70 This specification covers carbon steel sheets for the manufacture of welded containers, which must work under pressure and where a good tenacity is important.

If you need an industrial supplier... We are available for you.

Contact Us