Smooth finishing panel

The flat Plycem sheets of cement reinforced with mineralized fibers combine the following advantages:

Highly resistant as cement, the nobility and workability of wood.
They can be used both in structural applications (roof bases, mezzanines, facades, etc.) and in decorative applications (ceiling, partition walls, etc.).

Dimensions (m) Width	Dimensions (m) Long	Thickness (mm)	Recommended applications
1.22	2.44	6	Suspended ceilings
	3.05	8	Fixed ceilings, interior walls
		11	Facades, exterior walls, walls of bathrooms and kitchens, high traffic walls
		14	Bases of ceilings, facades, exterior walls
		17	Bases of ceilings, facades, mezzanines
		20	Bases of ceilings, facades, mezzanines

Laminations of 17 or 20 mm are recommended.
The sections of beams and columns are defined according to calculation.
The distance between belts must be 0.61 m to which the sheets are fixed through connectors (dimensions and size according to calculation = every 0.61 m.
The Truckson mesh is placed and finally a 5 cm thick concrete mortar.
Each with high flexural strength and excellent load distribution, Plycem mezzanines are lightweight, quick to install.

The walls constructed with flat Plycem can be:

Used indoors and outdoors, always respecting the manufacturer's technical recommendations.
The structure must be correctly aligned and plumb before fixing the sheets.

For the fixation of Plycem sheets to the metallic structure, it is necessary to use screws No 8 x 1 1/4 "self-tapping and self-countersunk with drill bit.
For correct fixing, the screws must be located respecting the minimum distances between them, at the edges and at the corners.
Place the screws in perpendicular position to the plates and crossing the structure at least 3 threads.

On a structure of aluminum profiles reinforced in both directions in modules of 0.60 x 1.20 m or 0.60 x 0.60 m, the flat Plycem sheets are installed.
Fix with pins or nails every 0.60 m.
Contributes to thermal and acoustic insulation.