STANDARD CERES
Standard trusses have constant characteristics, except for their height, weight and diagonal angle.
Diameter Wire Superior (d3): 7.0 mm. (Flat surface)
Diagonal Wire Diameter (d2): 4.5 mm. (Flat surface)
Lower diameter (d1): 5.0 mm. (Grooved surface)
Zig-zag pass (a): 20 cm. Separation between lower wires (b): 6 cm.
Type | Height (h) (cm) | Diagonal angles (º) | Weight (Kg/m) | Length (m) |
---|---|---|---|---|
C – 8 | 8 | 40.5 | 0.951 | From 2 to 12 m. with increments of 10 cm |
C – 10 | 10 | 46.4 | 0.973 | |
C – 15 | 15 | 57.7 | 1.077 | |
C – 20 | 20 | 64.6 | 1.194 |
SPECIAL STOPS
Special trusses are supplied upon request, thus satisfying the particular needs of the project and within the following range:
Height (h): From 7 to 30 cm with increments of 1 cm.
Length: From 2 to 12 cm with increments of 10 cm.
Zig-zag step (a): 20 cm.
Separation between lower wires (b): 6 cm
Diameter of Wires | ||
---|---|---|
Superior (d3) | Diagonal (d2) | Lower (d1) |
From 6.0 mm to 10.5 mm with increments of 0.5 mm (smooth or grooved surface) | From 4.5 mm to 6.0 mm with increments of 0.5 mm (smooth surface) | From 5.0 mm to 10.5 mm in increments of 0.5 mm (smooth or grooved surface) |
It is supplied on request
Source: Sidetur