English
EspañolI = Moment of Inertia
S = Moment of Resistance
R = Inertia Radio, Always Referred
To the corresponding bending axis
Qualities: ASTM-A-36
Covenin 1037-86
| UPEL | Dimensions (mm) | Area (cm2) | Weight (Kg/m) | Moment of inertia | Resistant Module | Turning radius | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (cm4) | (cm4) | (cm3) | (cm3) | (cm) | (cm) | |||||||
| h | b | s | t | Ix | Iy | Wx | Wy | Ix | Iy | |||
| UPE 80 | 80 | 50 | 4,0 | 7,0 | 10,1 | 7,90 | 107 | 25,4 | 26,8 | 7,98 | 3,26 | 1,59 |
| UPE 100 | 100 | 55 | 4,5 | 7,5 | 12,5 | 9,82 | 207 | 38,2 | 41,4 | 10,6 | 4,07 | 1,75 |
| UPE 120 | 120 | 60 | 5,0 | 8,0 | 15,4 | 12,1 | 364 | 55,4 | 60,6 | 13,8 | 4,86 | 1,90 |
| UPE 140 | 140 | 65 | 5,0 | 9,0 | 18,4 | 14,5 | 599 | 78,7 | 85,6 | 18,2 | 5,71 | 2,07 |
| UPE 160 | 160 | 70 | 5,5 | 9,5 | 21,7 | 17,0 | 911 | 107 | 114 | 22,6 | 6,48 | 2,22 |
| UPE 180 | 180 | 75 | 5,5 | 10,5 | 25,1 | 19,7 | 1,353 | 144 | 150 | 28,6 | 7,34 | 2,39 |
| UPE 200 | 200 | 80 | 6,0 | 11,0 | 29,0 | 22,8 | 1,909 | 187 | 191 | 34,4 | 8,11 | 2,54 |
| UPE 220 | 220 | 85 | 6,5 | 12,0 | 33,9 | 26,6 | 2,682 | 246 | 244 | 42,5 | 8,90 | 2,70 |
| UPE 240 | 240 | 90 | 7,0 | 12,5 | 38,5 | 30,2 | 3,599 | 311 | 300 | 50,1 | 9,67 | 2,84 |
| UPE 270 | 270 | 95 | 7,5 | 13,5 | 44,8 | 35,2 | 5,255 | 401 | 389 | 60,7 | 10,8 | 2,99 |
| UPE 300 | 300 | 100 | 9,5 | 15,0 | 56,6 | 44,4 | 7,823 | 538 | 522 | 75,6 | 11,8 | 3,08 |
| UPE 330 | 330 | 105 | 11,0 | 16,0 | 67,8 | 53,2 | 11,008 | 681 | 667 | 89,7 | 12,7 | 3,17 |
| UPE 360 | 360 | 110 | 12,0 | 17,0 | 77,9 | 61,2 | 14,825 | 844 | 824 | 105 | 13,8 | 3,29 |
| UPE 400 | 400 | 115 | 13,5 | 18,0 | 91,9 | 72,2 | 20,981 | 1,045 | 1,049 | 123 | 15,1 | 3,37 |
| Quality | Cedence Point Fy (Kg / cm2) | Max effort F Min (Kg / cm2) | Elongation% 50 (mm) |
|---|---|---|---|
| 1-AE-25 | 2500 | 3700 | 25 |
| 2-AE-35 | 3500 | 5500 | 22 |
| 3-ASTM A 36 | 2500 | 4100/5600 | 20 |
| 4- ASTM A 572, GRADE 50 | 3500 | 4500 | 21 |
| 5- ST 37 -2 | 2400 | 3700/4500 | 25 |
| 6-ST 50-3 | 3600 | 5200/6200 | 22 |
| Quality | % C (MAX) | % Mn (MAX) | % P (MAX) | % S (MAX) |
|---|---|---|---|---|
| 1-AE-25 | 0.20 | 0.80 | 0.05 | 0.05 |
| 2-AE-35 | 0.30 | 0.90 | 0.05 | 0.05 |
| 3-ASTM A 36 | 0.25 | --- | 0.04 | 0.05 |
| 4- ASTM A 572. GRADE 50 | 0.23 | 1.35 | 0.04 | 0.05 |
| 5- ST 37 -2 | 0.20 | --- | 0.06 | 0.05 |
| 6-ST 50-3 | 0.20 | --- | 0.05 | 0.05 |
COMPARATIVE TABLE U
| Designation | Metro weight | Piece Weight | Area | Dimensions | Properties | Constants | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UPN | d | P | Pt | A | Height | Wings | soul | X-X axis | Y-Y axis | Flexion | |||||||
| (mm) | (Kgf/m) | (Kgf) | (cm2) | d | bf | tf | tw | Ix | Sx | rx | Iy | Sy | ry | x | m | d/As | |
| (mm) | (cm4) | (cm3) | (cm) | (cm4) | (cm3) | (cm) | (cm) | (cm) | (cm-1) | ||||||||
| UPN 80 | 8.65 | 103.8 | 11 | 80 | 45 | 8 | 6 | 106 | 26.5 | 3.1 | 19.4 | 6.35 | 1.33 | 1.45 | 1.29 | 2.22 | |
| UPL 80 | 6.08 | 72.96 | 7.8 | 80 | 35 | 7 | 4.5 | 74.4 | 18.6 | 3.1 | 7.8 | 3.18 | 1 | 1.1 | 1.01 | 3.27 | |
| UPN 100 | 10.6 | 127.2 | 13.5 | 100 | 50 | 8.5 | 6 | 205 | 41.1 | 3.91 | 29.1 | 8.45 | 1.47 | 1.55 | 1.46 | 2.35 | |
| UPL 100 | 8.2 | 98.4 | 10.5 | 100 | 40 | 8 | 5 | 155 | 30.9 | 3.92 | 13.5 | 4.8 | 1.15 | 1.22 | 1.14 | 3.13 | |
| UPN 120 | 13.3 | 159.6 | 17 | 120 | 55 | 9 | 7 | 364 | 60.7 | 4.63 | 43.1 | 11.1 | 1.59 | 1.61 | 1.5 | 2.42 | |
| UPL 120 | 9.58 | 114.96 | 12.2 | 120 | 45 | 8 | 5 | 266 | 44.3 | 4.67 | 19.8 | 6.1 | 1.27 | 1.31 | 1.29 | 3.33 | |
| UPEL 120 | 10.4 | 124.8 | 13.3 | 120 | 52 | 7.8 | 4.8 | 304 | 50.6 | 31.2 | 8.52 | ||||||
| UPAM 5X6.7 | 9.97 | 119.64 | 12.7 | 127 | 44 | 8.13 | 4.83 | 310 | 48.8 | 4.94 | 19.3 | 5.93 | 1.23 | 1.1 | 1.13 | 3.52 | |
| UPN 140 | 16 | 192 | 20.4 | 140 | 60 | 10 | 7 | 605 | 86.4 | 5.45 | 62.5 | 14.7 | 1.75 | 1.76 | 1.69 | 2.33 | |
| UPL 140 | 11.3 | 135.6 | 14.5 | 140 | 50 | 8.5 | 5 | 435 | 62.1 | 5.48 | 29 | 7.9 | 1.41 | 1.44 | 1.47 | 3.29 | |
| UPEL 140 | 12.3 | 147.6 | 15.6 | 140 | 58 | 8.1 | 4.9 | 491 | 70.2 | 45.4 | 11 | ||||||
| UPAM 6X8.2 | 12.2 | 146.4 | 15.5 | 152 | 49 | 8.71 | 5.08 | 544 | 71.4 | 5.92 | 27.9 | 7.71 | 1.34 | 1.22 | 1.22 | 3.59 | |
| UPN 160 | 18.9 | 226.8 | 24 | 160 | 65 | 10.5 | 7.5 | 925 | 116 | 6.21 | 85 | 18.2 | 1.88 | 1.84 | 1.8 | 2.34 | |
| UPL 160 | 13 | 156 | 16.6 | 160 | 50 | 9 | 5.5 | 631 | 78.8 | 6.16 | 32.3 | 8.7 | 1.39 | 1.36 | 1.37 | 3.56 | |
| UPEL 160 | 14.2 | 170.4 | 18.1 | 160 | 64 | 8.4 | 5 | 747 | 93.4 | 63.3 | 13.8 | ||||||
| UPAM 7X9.8 | 14.6 | 175.2 | 18.5 | 178 | 53 | 9.3 | 5.33 | 883 | 99.3 | 6.9 | 39 | 9.79 | 1.45 | 1.31 | 1.31 | 3.6 | |
| UPN 180 | 22 | 264 | 28 | 180 | 70 | 11 | 8 | 1350 | 150 | 6.96 | 113 | 22.4 | 2.01 | 1.93 | 1.9 | 2.34 | |
| UPL 180 | 15.6 | 187.2 | 19.9 | 180 | 55 | 9.5 | 6 | 943 | 105 | 6.89 | 45.6 | 11 | 1.51 | 1.46 | 1.48 | 3.44 | |
| UPEL 180 | 16.3 | 195.6 | 20.7 | 180 | 70 | 8.7 | 5.1 | 1090 | 121 | 86 | 17 | ||||||
| UPN 200 | 25.3 | 303.6 | 32.2 | 200 | 75 | 11.5 | 8.5 | 1910 | 191 | 7.71 | 148 | 26.9 | 2.14 | 2.01 | 2 | 2.32 | |
| UPL 200 | 17.7 | 212.4 | 22.5 | 200 | 60 | 10 | 6 | 1344 | 134 | 7.72 | 62.1 | 13.8 | 1.66 | 1.59 | 1.67 | 3.33 | |
| UPEL 200 | 18.4 | 220.8 | 23.4 | 200 | 76 | 9 | 5.2 | 1520 | 152 | 113 | 20.5 | ||||||
| UPAM 8X11.5 | 17.1 | 205.2 | 21.8 | 203 | 57 | 9.91 | 5.59 | 1350 | 133 | 7.88 | 53.1 | 12.2 | 1.56 | 1.44 | 1.4 | 3.57 | |
| UPN 220 | 29.4 | 352.8 | 37.4 | 220 | 80 | 12.5 | 9 | 2690 | 245 | 8.48 | 196 | 33.5 | 2.29 | 2.14 | 2.14 | 2.2 | |
| UPAM 9X13.4 | 19.8 | 237.6 | 25.3 | 229 | 62 | 10.5 | 5.92 | 1970 | 172 | 8.83 | 70.8 | 15.1 | 1.67 | 1.36 | 1.51 | 3.53 | |
| UPN 240 | 33.2 | 398.4 | 42.3 | 240 | 85 | 13 | 9.5 | 3600 | 300 | 9.22 | 247 | 39.5 | 2.42 | 2.24 | 2.24 | 2.17 | |
| UPL 240 | 21.1 | 253.2 | 26.9 | 240 | 65 | 11 | 6.5 | 2384 | 199 | 9.41 | 89.6 | 18.4 | 1.82 | 1.66 | 1.76 | 3.36 | |
| UPEL 240 | 24 | 288 | 30.6 | 240 | 90 | 10 | 5.6 | 2900 | 242 | 208 | 31.6 | ||||||
| UPAM 10X15.3 | 22.6 | 271.2 | 28.8 | 254 | 66 | 11.1 | 6.1 | 2780 | 219 | 9.82 | 91.7 | 18.2 | 1.78 | 1.46 | 1.61 | 3.47 | |
| UPN 260 | 37.9 | 454.8 | 48.3 | 260 | 90 | 14 | 10 | 4820 | 371 | 10 | 317 | 47.8 | 2.56 | 2.37 | 2.38 | 2.06 | |
| UPEL 270 | 27.7 | 332.4 | 35.2 | 270 | 95 | 10.5 | 6 | 4160 | 308 | 262 | 37.3 | ||||||
| UPN 280 | 41.9 | 502.8 | 53.4 | 280 | 95 | 15 | 10 | 6280 | 448 | 10.8 | 398 | 57.1 | 2.73 | 2.53 | 2.6 | 1.96 | |
| UPN 300 | 46.1 | 553.2 | 58.8 | 300 | 100 | 16 | 10 | 8030 | 535 | 11.7 | 493 | 67.6 | 2.9 | 2.7 | 2.81 | 1.88 | |
| UPL 300 | 32.1 | 385.2 | 41 | 300 | 76 | 13 | 8 | 5260 | 351 | 11.3 | 166 | 28.8 | 2.01 | 1.84 | 1.91 | 3.08 | |
| UPEL 300 | 31.8 | 381.6 | 40.5 | 300 | 100 | 11 | 6.5 | 5810 | 387 | 327 | 43.6 | ||||||
| UPAM 12X20.7 | 30.6 | 367.2 | 39 | 305 | 75 | 12.7 | 7.16 | 5320 | 349 | 11.7 | 156 | 27.1 | 2 | 1.59 | 1.77 | 3.21 | |
| UPAM 15X33.9 | 50.3 | 603.8 | 64 | 381 | 86 | 16.5 | 10.2 | 13000 | 683 | 14..3 | 326 | 48.8 | 2.26 | 1.66 | 1.83 | 2.67 | |
| UPEL 400 | 48.3 | 579.6 | 61.5 | 400 | 115 | 13.5 | 8 | 15220 | 761 | 642 | 73.4 | ||||||
APPROXIMATE EQUIVALENCES STANDARD SERIES
| PROPERCA | DIN | ASTM | SOLDIERS | UPN PROFILES | TUBULARS |
|---|---|---|---|---|---|
| PROPERTIES OF STEEL kg / cm2 | |||||
| Fy=2530 Fu=4080 | Fy=2400 Fu=3700 | Fy=2530 Fu=4080 | Fy=2530 Fu=4080 | ||
| Height x Weight | Height | Height x Weight | Height x Weight | ||
| VP120X9.7 | IPN 120 IPE 120 | UPN 80 UPN 100 | 60X60X3.98 70X70X4.68 80X40X3.98 100X40.4.68 120X60X6.78 | ||
| VP140X12.4 | IPN 140 IPE 140 | UPN 140 | 90X90X6.74 140X60X8.96 | ||
| VP160X16.4 | IPN 160 IPE 140 | 160X65X11.3 | |||
| VP180X17.7 | IPE 180 IPN 180 | W6X12 | UPN 160 | 100X100X8.96 110X110X11.2 180X65X14.3 | |
| VP200X24.1 | IPE 220 IPN 200 | W 8X12 W 8X15 W 10X15 | VS 200X23 CVS200X22 | UPN 180 UPN200 | 120X120X14.3 200X70X17.0 220X90X20.6 |
| VP250X29.4 | IPE 240 IPN 240 | W8X21 W10X19 | VS 250X29 VS 250X28 CVS200X28 | UPN 240 | 120X120X14.3 135X135X17.0 260X90X28.3 |
| VP300X41.3 | IPE 270 IPE 300 | W 10X26 W12X26 W14X26 | VS 300X35 VS 300X42 CVS 250X33 | UPN 300 | |
| VP350X48.3 | IPE 330 IPN 300 IPN 320 | W12X35 W16X31 | VS 350X43 CVS250X39 | 320X120X45.2 | |
| VP400X55.4 | IPE 360 IPN 340 | W14X43 W16X36 W18X35 | VS400X55 CVS300X47 | ||
| VP420X65.7 | IPE 400 IPN 360 | W16X40 W18X40 | VS400X62 VS450X57 CVS300X51 | 350X170X68.2 | |
| CP140X25.5 | HEA 140 HEB100 | W 6X15 W6X20 | 135X135X17.0 | ||
| CP160X29.3 | HEA 160 HEB 120 | W 6X20 | 155X155X20.6 | ||
| CP180X33.1 | HEA 180 HEB 140 | CS200X29 | 155X155X20.6 | ||
| CP200X50.1 | HEA 180 HEA 200 HEB 160 | W6X25 W 8X31 | CS200X38 CS200X48 | ||
| CP220X55.3 | HEA 220 HEB 180 | W8X25 | CS200X48 CS200X46 | ||
| CP240X60.4 | HEA 240 HEB 200 | W8X40 W10X33 W10X39 | CS200X58 CS250X50 | 220X220X45.2 | |
| CP260X65.7 | HEA 260 HEB 220 | W10X45 W12X45 | CS250X62 CS300X62 | ||
| CP140X25.5 | HEA 140 HEB100 | W 6X15 W6X20 | 135X135X17.0 | ||
| CP160X29.3 | HEA 160 HEB 120 | W 6X20 | 155X155X20.6 | ||
| CP180X33.1 | HEA 180 HEB 140 | CS200X29 | 155X155X20.6 | ||
| CP200X50.1 | HEA 180 HEA 200 HEB 160 | W6X25 W 8X31 | CS200X38 CS200X48 | ||
| CP220X55.3 | HEA 220 HEB 180 | W8X25 | CS200X48 CS200X46 | ||
| CP240X60.4 | HEA 240 HEB 200 | W8X40 W10X33 W10X39 | CS200X58 CS250X50 | 220X220X45.2 | |
| CP260X65.7 | HEA 260 HEB 220 | W10X45 W12X45 | CS250X62 CS300X62 | ||
