Español
EnglishMateria Prima: Laminado en Frío
ASTM-A-366 / A-619
Largo 6mts
| Diámetro | Espesor | Peso | Diámetro | Espesor | Peso | |
|---|---|---|---|---|---|---|
| (Pulg) | (mm) | (Kg/mt) | (Pulg) | (mm) | (Kg/mt) | |
| 1/2 | 0.90 | 0.265 | 1-3/4 | 1.10 | 1.199 | |
| 1/2 | 1.10 | 0.316 | 1-3/4 | 1.20 | 1.305 | |
| 1/2 | 1.20 | 0.347 | 1-3/4 | 1.40 | 1.516 | |
| 1/2 | 1.50 | 0.423 | 1-3/4 | 1.50 | 1.620 | |
| 5/8 | 0.90 | 0.337 | 1-3/4 | 1.90 | 2.034 | |
| 5/8 | 1.10 | 0.408 | 1-7/8 | 0.90 | 1.058 | |
| 5/8 | 1.20 | 0.443 | 1-7/8 | 1.10 | 1.287 | |
| 5/8 | 1.40 | 0.510 | 1-7/8 | 1.20 | 1.401 | |
| 5/8 | 1.50 | 0.542 | 1-7/8 | 1.40 | 1.628 | |
| 5/8 | 1.90 | 0.673 | 1-7/8 | 1.50 | 1.740 | |
| 3/4 | 0.90 | 0.408 | 1-7/8 | 1.90 | 2.185 | |
| 3/4 | 1.10 | 0.500 | 2 | 0.90 | 1.130 | |
| 3/4 | 1.20 | 0.539 | 2 | 1.10 | 1.375 | |
| 3/4 | 1.40 | 0.622 | 2 | 1.20 | 1.497 | |
| 3/4 | 1.50 | 0.662 | 2 | 1.40 | 1.740 | |
| 3/4 | 1.90 | 0.826 | 2 | 1.50 | 1.860 | |
| 7/8 | 0.90 | 0.479 | 2 | 1.90 | 2.337 | |
| 7/8 | 1.10 | 0.578 | 2-1/4 | 1.10 | 1.551 | |
| 7/8 | 1.20 | 0.635 | 2-1/4 | 1.20 | 1.689 | |
| 7/8 | 1.40 | 0.734 | 2-1/4 | 1.40 | 1.963 | |
| 7/8 | 1.50 | 0.782 | 2-1/4 | 1.50 | 2.100 | |
| 7/8 | 1.90 | 0.969 | 2-1/4 | 1.90 | 2.640 | |
| 1 | 0.90 | 0.551 | 2-3/8 | 1.20 | 1.785 | |
| 1 | 1.10 | 0.673 | 2-3/8 | 1.50 | 2.219 | |
| 1 | 1.20 | 0.731 | 2-3/8 | 1.90 | 2.792 | |
| 1 | 1.40 | 0.847 | 2-1/2 | 1.10 | 1.727 | |
| 1 | 1.50 | 0.902 | 2-1/2 | 1.20 | 1.880 | |
| 1 | 1.90 | 1.122 | 2-1/2 | 1.40 | 2.187 | |
| 1-1/4 | 0.90 | 0.698 | 2-1/2 | 1.50 | 2.339 | |
| 1-1/4 | 1.10 | 0.848 | 2-1/2 | 1.90 | 2.944 | |
| 1-1/4 | 1.20 | 0.922 | 2-3/4 | 1.20 | 2.072 | |
| 1-1/4 | 1.40 | 1.069 | 2-3/4 | 1.50 | 2.579 | |
| 1-1/4 | 1.50 | 1.141 | 2-3/4 | 1.90 | 3.247 | |
| 1-1/4 | 1.90 | 1.427 | 3 | 1.50 | 2.818 | |
| 1-1/2 | 1.10 | 1.024 | 3 | 1.90 | 3.551 | |
| 1-1/2 | 1.20 | 1.114 | 3-1/2 | 1.50 | 3.298 | |
| 1-1/2 | 1.40 | 1.292 | 3-1/2 | 1.90 | 4.158 | |
| 1-1/2 | 1.50 | 1.381 | 4 | 1.50 | 3.777 | |
| 1-1/2 | 1.90 | 1.730 | 4 | 1.90 | 4.765 | |
| 1-5/8 | 1.10 | 1.204 | 4-1/2 | 1.50 | 4.256 | |
| 1-5/8 | 1.20 | 1.310 | 4-1/2 | 1.90 | 5.372 | |
| 1-5/8 | 1.40 | 1.404 | ||||
| 1-5/8 | 1.50 | 1.626 | ||||
| 1-5/8 | 1.90 | 2.044 | ||||
| CALIDAD | C | Mn | Si | Smax | Pmax |
|---|---|---|---|---|---|
| LAMINADO EN FRIO | 0.15 | 0.60 | – | 0.040 | 0.035 |
| ASTM – A – 366 | |||||
| ASTM – A – 619 | 0.10 | 0.50 Max | – | 0.035 | 0.025 |
| ASTM – A – 620 | 0.10 | 0.50 Max | – | 0.035 | 0.025 |
| LAMINADO EN CALIENTE | 0.15 | 0.60 | – | 0.040 | 0.035 |
| ASTM – A – 569 | |||||
| ASTM – A – 36 | 0.25 | – | – | 0.050 | 0.040 |
| ASTM – A – 572 GRADO 50 | 0.23 | 1.35 | – | 0.050 | 0.040 |
| SAE 1020 | 0.20 | 30/50 | – | 0.050 | 0.040 |
| API5L GRADO B | 0.30 | 1.20 | – | 0.045 | 0.050 |
| ASTM – A – 53 | 0.30 | 1.20 | – | 0.045 | 0.050 |
| CALIDAD | R (Kg/mm2) | RE min (kg/mm2) | A % 8? |
|---|---|---|---|
| LAMINADO EN CALIENTE | 41.0/56.0 | 25.5 | 20 |
| ASTM – A – 36 | |||
| ASTM – A – 572 GRADO 50 | 43.6 | 32.5 | 21 |
| SAE 1020 | 40 | 22.5 | 25 |
| ASTM – A – 53 | 42 | 24.0 |
